How hard is the iGuard to install?
Plug-in Model:
The electric plug in model does not require an electrician. Any handyman can do the job in about 15 minutes. Everything plugs together and the control panel mounts with 2 screws.
Gas Model:
For a safe installation of the iGuard gas model we recommend it be installed by a certified plumber or gas line fitter. Check out the Installation videos under our Resources Menu for step-by-step details.
Cooktop Model:
The model for cooktops will require an electrician to install it properly.
App:
You will have to download the iGuard App to your phone and then it will guide you through the setup.
Related Articles
Can I get more detailed install instructions?
1. Pull the stove away from the wall and unplug stove from wall outlet. 2. Plug the iGuard power box into the wall outlet and you should see a blue light inside the box confirming power. 3. Plug the stove cord into the iGuard power box. (3-wire ...
iGuard not showing on app while trying to connect
If you are trying to add your iGuard to your app and it is not showing you can try these tricks: Turn off the app and then turn off your phone and then start them back up again. When you press the reset button using a toothpick, hold it for about 6 ...